Here is a little know fact (not really) – On the PIC10F322 – If you are using the internal oscillator for the system clock – following any Reset, the IRCF<2:0> bits of the OSCCON register are set to ‘110’ and the frequency selection is set to 8 MHz.

That means, until you change the OSCCON Register INTOSC (FOSC) Frequency Select bits in software – the device is running at 8Mhz.

OSCCON: OSCILLATOR CONTROL REGISTER

bit 6-4 IRCF<2:0>: INTOSC (FOSC) Frequency Select bits
111 = 16 MHz
110 = 8 MHz (default value)
101 = 4 MHz
100 = 2 MHz
011 = 1 MHz
010 = 500 kHz
001 = 250 kHz
000 = 31 kHz (LFINTOSC)